B.Well WA-33 Wartungshandbuch

1 WA 33 UNIVERSAL OIL HEATER OPERATING MANUAL aryjnąależy dokładn 1. Przeznaczenie

10 Maintenance The heater requires little maintenance activities. The observance of manufacturer’s recommendations will ensure fault-free and s

11 10. Repair of defects In the case of the failure of the device, the list below may help in locating the defect. In general, its removal is simple

12 TECHNICAL DATA Minimum thermal efficiency kW 22 Maximum thermal efficiency kW 30* Minimum oil consumption kg/h 1,85 Maximum oil consumptio

13 EC DECLARATION OF CONFORMITY Manufacturer: DESA Poland Sp. z o.o. Address: ul. Magazynowa 5A, 62-023 Gądki, Polska Product

14 DESA EUROPE BV Postbus 271, 4700 AG Roosendaal, The Netherlands www.desa.nl DESA Italia SRL Via Tione 12 Pastrengo, Verona (VR) Italy 37010 w

2 In order to ensure proper use and fault-free operation of the furnace, read this manual carefully. 1. Destination The WA 33 universal oil heater

3 The second bimetallic sensor is placed nearby the air supply fan, its threshold temperature is 90°C. Opening of its contacts, in consequence of exce

4 Fig.2. Furnace controller –group of conductors 7. Installation of the device - during the installation of the device, meet all the local reg

5 - if possible, all the chimney section should be vertical – avoid horizontal sections as well as bends of the chimney pipe, if necessary (e.g. two

6 Fig.3. Chimney installation 8. Description of the operation of the device Control panel The controller of the WA 33 furnace for universal oil is

7 operates until the furnace temperature is below 35°C (damping). After the temperature reaches less than 35°C, the furnace returns to the Stop phase.

8 1.Thermostat at the combustion chamber 2. Protection against overheating 3. Overflow protection 9. Operation of the heaters NOTE YOU MUST

9 Do not connect the device to the mains, when the fan is in operation, wait until the furnace is cooled off. The furnace is switched off automatical